1
2 3 4
5 6 7
8 9 10
11 12 13
14 15
Printable
PDF of this presentation
|
Slide 12 We now look at the behavior of a shaft made of a ductile material under torsional loading. Hooke’s law applies only when the shear stress is below the yield stress, tau y .The value of the torque at the start of yield is given by T yield is equal to tau y times J over r zero, where tau y is the shear yield strength of the material and r zero is the outer radius of the shaft. Note also that the outer surface yields first and then the plastic deformation progresses to the center of the shaft as the torque increases. |
|
Chalk
Talks Virtual
Tests Test Data Lab Manual |